CRIO

The cRIO RJ50 Cable, crafted by National Instruments, is a crucial component for the assembly of cRIO measurement, control, or monitoring systems. ...

The cRIO Power Cable, as implied by its name, is a power conduit specifically tailored for use with National Instruments cRIO (CompactRIO) systems....

The cRIO I/O Cable, a product by National Instruments, is a specifically constructed accessory for systems that employ CompactRIO (cRIO) controller...

The NI cRIO ECAT S is an EtherCAT Interface Module, engineered collaboratively by National Instruments (NI) and KUNBUS. Identified by the NI part n...

The cRIO-9957, part number 194881-01, is a National Instruments C Series Module Shell. It includes 100 die-cast housings for CompactRIO modules and...

The cRIO-9956 is a Module Shell designed for CompactRIO Modules, identified by part number 781487-01. It features cutouts for four BNC connectors a...

The cRIO-9955, manufactured by National Instruments, is a versatile CompactRIO accessory module with the part number 781486-01. It features 37-pin ...

The cRIO-9954 is a versatile part, designated as 781485-01, designed for the CompactRIO platform. It features 8 LED slots and multiple connector cu...

The cRIO-9953 by National Instruments, part number 781484-01, features a PCB right-angle 15-pin D-SUB connector type. It is compatible with Compact...

The cRIO-9952 from National Instruments is a part of the C Series with the part number 781483-01. It features a 10-position screw terminal, PCB rig...

The cRIO-9940 is a model specifically designed to be compatible with 36-position C Series modules featuring spring terminals. It is recommended for...

The cRIO-9936 is a versatile model under the CompactRIO family, identified by part number 779105-01. It features 10-pin, male COMBICON connections ...

The cRIO-9932 is a National Instruments C Series Module Backshell designed for strain relief to protect cables from stress. It features spring term...

The cRIO-FRC is a model that requires an external power supply with a power-on self-test (POST) function. It features CAT-5 Ethernet or Ethernet Hy...

The cRIO-9958 is a National Instruments C Series Module Shell, offering a low-cost solution for creating customized CompactRIO I/O modules. Produce...

The cRIO-9939, a C Series Module Backshell manufactured by National Instruments, is identified by part number 192692-01. This model is compatible w...

The cRIO-9937, part number 779106-01, is a power supply connector kit compatible with real-time CompactRIO Controllers. It includes ten 4-position ...

The cRIO-9805 is a model with part number 786993-01, featuring four internally switched ports supporting PTP of IEEE 802.1AS. It operates on a powe...

The cRIO-9803 is an Expansion Module for CompactRIO that boasts a data rate of 5 Gb per second. It features a SATA II drive interface and comes in ...

The cRIO-9148 is a CompactRIO Chassis with model number cRIO-9148 and part number 781502-01. It supports both Filtered (Synchronous) and Direct (As...

The cRIO-9118 is a versatile part, compatible with part numbers 780920-01 and 780920-02. It features programming through LabVIEW FPGA and supports ...

The cRIO-9116 is a versatile model (Part Number: 780919-01) designed for use in the LabVIEW FPGA programming environment. It features single-point ...

The cRIO-9114 is a versatile model featuring an 8-slot chassis and a Virtex-5 LX50 FPGA. It is compatible with part numbers 780918-01 and 780918-02...

The cRIO-9113 is a versatile model featuring a Virtex-5 FPGA and a 10-bit 200k SPS ADC system monitor. Supporting unipolar, bipolar, and differenti...