SCC

The SCC-TCI by National Instruments is a single-channel input terminal designed for ground-referenced and floating thermocouples. It supports vario...

The SCC-TC02 is a thermocouple input module, identified by part number 777459-04, supporting thermocouple types B, E, J, K, N, R, S, and T. It feat...

The SCC-TC01 features a part number of 777459-03. It operates optimally at 25 degrees Celsius with an input range from -100 mV to +100 mV and volta...

The SCC-SG24 features 2 differential input channels with a signal range of ±100 mV. It offers an analog input bandwidth of 1.6 kHz for a single pol...

The SCC-SG04 is a high-precision part with Part Number 777459-16, featuring 2 channels and a signal range from -100 mV to +100 mV. It comes equippe...

The SCC-SG03, part number 777459-15, features an excitation current drive of up to 60 mA. It supports a voltage range of -10 V to +10 V and include...

The SCC-SG02 is a strain gage with a resistance of 350 Ω and operates with a 2.5 V excitation source. It has a model number SCC-SG02 and part numbe...

The SCC-SG01 features part number 777459-13 and comes equipped with 2 Differential Input (DI) Channels. It supports an input signal range of ±100 m...

The SCC-RTD01, identified by part number 777459-18, is a model with a maximum input voltage of ±400 mVDC. It weighs 0.8 oz (24 g) and operates with...

The SCC-RLY01 is a National Instruments Relay Module (Part Number: 777459-34) designed with SPDT, non-latching relays capable of handling 5 A at 30...

The SCC-PWR03, manufactured by National Instruments, provides an output voltage of +5V and ±15V. It operates within an input voltage range of 7 VDC...

The SCC-PWR02 is a versatile power module featuring an input voltage range of 100 to 240 VAC. It provides output voltages of +5 VDC, -15 VDC, and 1...

The SCC-PWR01 by National Instruments, part number 183971-01, is designed to convert voltages from +5V to +15V and +5V to -15V. It boasts an output...

The SCC-LP04 from National Instruments, part number 777459-10, is engineered for compatibility with SC-2345 and E Series DAQ devices. It features a...

The SCC-LP03 features a cutoff frequency of 150 Hz with an input signal range of ±10 V and an output signal range of ±5 V. It boasts a high input i...

The SCC-LP02 features an input signal range of ±10 V and a typical input bias current of ±2 nA. It has a wide-band noise of 100 microvolts RMS nois...

The SCC-LP01 is a fourth-order Butterworth filter with a cutoff frequency of 25 Hz. It operates within a voltage range of ±10 volts and can handle ...

The SCC-ICP, part number 777459-19, requires NI-DAQ version 6.8 or later driver software and is compatible with the SC-2345 Carrier. It features on...

The SCC-FV01, part number 777459-32, is a model designed with 2 RSE input channels. It handles input signal amplitudes of +/-200 mV. The device sup...

The SCC-FT01, part number 777459-01, features 2 single-ended or 1 differential AI and 1 AO analog I/O channels. It includes a 20-pin right-angle ma...

The SCC-DO01 is a National Instruments module (Part Number: 777459-12) designed to operate within a voltage supply range of 5-24 VDC. It connects v...

The SCC-DI01, part number 777459-11, operates with an input voltage range of up to 30 VDC or 30 VAC and features a logic high voltage threshold of ...

The SCC-CTR01 is a versatile component with an input voltage range of up to 48 VDC and can operate within temperatures from 0 to 50 °C. It is compa...

The SCC-CO20 is a versatile model, specified under part number 777459-33. It features an output current range of 0 to 20 mA and an input voltage ra...