SC

The SCC-LP03 features a cutoff frequency of 150 Hz with an input signal range of ±10 V and an output signal range of ±5 V. It boasts a high input i...

The SCC-LP02 features an input signal range of ±10 V and a typical input bias current of ±2 nA. It has a wide-band noise of 100 microvolts RMS nois...

The SCC-LP01 is a fourth-order Butterworth filter with a cutoff frequency of 25 Hz. It operates within a voltage range of ±10 volts and can handle ...

The SCC-ICP, part number 777459-19, requires NI-DAQ version 6.8 or later driver software and is compatible with the SC-2345 Carrier. It features on...

The SCC-FV01, part number 777459-32, is a model designed with 2 RSE input channels. It handles input signal amplitudes of +/-200 mV. The device sup...

The SCC-FT01, part number 777459-01, features 2 single-ended or 1 differential AI and 1 AO analog I/O channels. It includes a 20-pin right-angle ma...

The SCC-DO01 is a National Instruments module (Part Number: 777459-12) designed to operate within a voltage supply range of 5-24 VDC. It connects v...

The SCC-DI01, part number 777459-11, operates with an input voltage range of up to 30 VDC or 30 VAC and features a logic high voltage threshold of ...

The SCC-CTR01 is a versatile component with an input voltage range of up to 48 VDC and can operate within temperatures from 0 to 50 °C. It is compa...

The SCC-CO20 is a versatile model, specified under part number 777459-33. It features an output current range of 0 to 20 mA and an input voltage ra...

The SCC-CI20 is a component with Part Number 777459-05 and a Resistance Value of 249 Ohms. It operates within a Signal Voltage Range of 0 to 5 volt...

The SCC-AO10 is a high-performance model with part number 777459-50. It features an output voltage range of ±10 volts, expandable to ±20 volts, and...

The SCC-AI14, part number 777459-28, connects to the analog input socket on the SC-2345. It features an input range of +/- 5 V and an output range ...

The SCC-AI13, part number 777459-27, supports an analog input voltage range of ±50 mV to ±42 V. It features a safety working isolation of 300 V per...

The SCC-AI07 is a model designed with a floating configuration of a solitary end input. It features a resistor range for floating signal interfaces...

The SCC-AI06, part number 777459-25, features a gain of 100 and a bandwidth of 10 kHz. It operates within an input range of ±100 mV and has an oper...

The SCC-AI05 is a high-performance unit featuring a bandwidth of 10 kHz and an input impedance of 100 MΩ. It offers a continuous isolation voltage ...

The SCC-AI04 is a versatile part featuring a model number SCC-AI04 and part number 777459-23. It operates within a 10 kHz bandwidth and offers a ga...

The SCC-AI03 is a versatile component with a bandwidth of 10 kHz and a gain of 1.0. It operates efficiently with an analog power requirement of 410...

The SCC-AI02 is a model featuring two input channels and a bandwidth of 10 kHz. With an input impedance of 1 MΩ, it is identified by the part numbe...

The SCC-AI01, part number 777459-20, features 2 NRSE input channels. It boasts a typical common-mode rejection ratio of 100 dB at 60 Hz and has pow...

The SCC-ACC01, Part Number 777459-19, has a maximum input range of ±5 V. It consumes up to 89 mW of analog power and operates within a temperature ...

The SCC-A10, part number 777459-06, operates within an input voltage range of ±60 VDC and features a bandwidth of 10 kHz. It includes two input cha...

The SCC-68 is a device with part number 779475-01. It measures 9.63 x 7.00 x 2.09 inches and weighs 6 ounces. It operates within a temperature rang...