NI

The NI-9795 is a versatile module with model number NI-9795 and part number 781992-01, designed for CompactRIO systems. It includes the LabVIEW Wir...

The NI-9775, part number 784539-01, features a 14-bit resolution and a sample rate of 20 MS/s per channel. With a weight of 172 g, it operates effi...

The NI-9770 model offers a measurement range from 30 kHz to 100 MHz and a sample rate of 320 kS/s. With a dynamic range of 104 dB, it provides prec...

The NI-9760 features six differential information channels, each configurable as VR or Hall impact sensor inputs, making it highly versatile. It in...

The NI-9759 features part number 782081-01 and includes two H-Bridge driver channels. It requires an external power supply ranging from 11 V to 32 ...

The NI-9758 is a 4-channel driver with both low and high impedance capabilities, supporting a continuous duty current of 1.5 A. It requires an exte...

The NI-9757 is a versatile model supporting Bosch LSU 4.2 or 4.9 wideband and 4 differential narrowband sensors. Operating within a power supply ra...

The NI-9754 is an 8-channel TTL output module with a voltage range of 0 V to 5 V and uses an HD15 connector type. This model, part number 782077-01...

The NI-9753 is a versatile module featuring 8 separately controlled I/O channels and a voltage range of 0 V to 5 V, compatible with RS485/422 diffe...

The NI-9752, part number 782075-01, features 21 analog input channels with a 60 VDC input range for VR sensor inputs. It has a 12-bit resolution fo...

The NI-9751 is a model with part number 782076-01, designed with 3 channels for solenoid injectors, 2 for standard piezo injectors, and 1 for inver...

The NI-9516 is designed for efficient table data extraction. This high-performance part streamlines the process, making it easier to manage and uti...

The NI-9514 features a voltage range of up to ±10 V and offers an encoder power output of +5 V. It boasts a 16-bit resolution and operates with a c...

The NI-9512 is a National Instruments C Series Motor Drive Interface Module identified by part number 779944-01. It boasts a maximum pulse rate of ...

The NI-9505, manufactured by National Instruments, is identified by the part number 779126-01. It supports a recommended PWM rate of 20 kHz, with t...

The NI-9503 is a model with part number 783285-01, designed to support micro stepping rates up to 256. It operates on a DC power supply ranging fro...

The NI-9502 is a part number 781282-01 motor driver with a continuous motor output current of 4 A and a peak of 8 A. It operates within a power sup...

The NI-9501 is a part designed for compatibility with 2-phase hybrid stepper motors, specifically NEMA 17 and NEMA 23. It supports various microste...

The NI-9485, available under part numbers 779600-01 and 779600-02, supports a maximum switching voltage range of 60 VDC or 30 Vrms. It features a r...

The NI-9482 is a part with numbers 783906-01 and 782999-01, featuring 4 electromechanical relay channels. It consumes 580 mW when active and 10 mW ...

The NI-9481 features 4 channels and uses Single-Pole Single Throw (SPST) relays. It supports a maximum switching voltage of 30 VDC (2 A), 60 VDC (1...

The NI-9478 features 16 channels and a current capacity of 16 A per module. It supports digital I/O logic levels of 12V, 24V, and 48V. The part num...

The NI-9477 features 32 digital output channels and supports a maximum signal voltage of 60 V. It has an update rate of up to 8 μs and weighs 5.1 o...

The NI-9476 features 32 digital output channels and is compatible with CompactDAQ and CompactRIO platforms. It boasts a maximum update rate of 500 ...