NI

The NI-5191 is a high-performance model designed for precision with a part number of 781785-01. It operates at a frequency of 800 MHz and features ...

The NI-9997 is a versatile module featuring Category II channel-to-channel isolation and supports up to 11 amperes of current per channel. It opera...

The NI-9977 is a model designed for filling empty slots in CompactRio and CompactDAQ Chassis. Weighing just 4.4 oz, it is compatible with wire gaug...

The NI-9969 Strain Relief and Extra Connector is designed for use with National Instruments NI-9244 C Series Voltage Input Modules. It supports wir...

The NI-9967 is compatible with two part numbers: 783094-01 and 156514A-01 (Rev A or higher), and works with the National Instruments NI-9242 (Part ...

The NI-9882 is a 1-Port DeviceNet Interface with a Model Number of NI-9882 and Part Number 781674-01. It supports a baud rate of up to 1 Mbps. Powe...

The NI-9881 is the part essential for table data extraction, offering robust performance and reliability. Its advanced design ensures seamless inte...

The NI-9871E is a versatile part featuring four RJ-50 receptacles that support RS-485/RS-422 communications. With a model number of NI-9871E and a ...

The NI-9871 features four ports and delivers a maximum baud rate of 3.6864 Mbps. Ideal for harsh environments, it operates within a temperature ran...

The NI-9870E features four individual RS232 DTE ports with RJ-50 receptacles. It operates on a power supply voltage of +8 V to +28 V and adheres to...

The NI-9866 is a versatile part number 781963-01 featuring a 9-pin male D-Sub connector. It supports baud rates up to 20 kbps and consumes up to 1 ...

The NI-9861, part number 781962-01, erases an XNET outline question with all mapped PDUs, incorporating signals, and subframes in those PDUs. Its M...

The NI-9860 is a versatile model requiring an external power supply of +9 to +30 V. It features high-speed and fault-tolerant Controller Area Netwo...

The NI-9853E features two high-speed CAN ports and utilizes the NXP SJA1000 controller, which is CAN 2.0B-compatible. It includes NXP TJA1041 trans...

The NI-9853 is equipped with two isolated CAN ports, providing robust communication via two 9-pin male D-Sub connectors. Its controller is the Phil...

The NI-9852 is a part number 779707-01 with 2 independent and fully featured CAN ports. It is compatible with Philips SJA1000, CAN 2.0B, and suppor...

The NI-9802 supports part numbers 779941-01 and 779941-02, offering write/read speeds of 2 MB per second per SD card, and a maximum storage capacit...

The NI-9795 is a versatile module with model number NI-9795 and part number 781992-01, designed for CompactRIO systems. It includes the LabVIEW Wir...

The NI-9775, part number 784539-01, features a 14-bit resolution and a sample rate of 20 MS/s per channel. With a weight of 172 g, it operates effi...

The NI-9770 model offers a measurement range from 30 kHz to 100 MHz and a sample rate of 320 kS/s. With a dynamic range of 104 dB, it provides prec...

The NI-9760 features six differential information channels, each configurable as VR or Hall impact sensor inputs, making it highly versatile. It in...

The NI-9759 features part number 782081-01 and includes two H-Bridge driver channels. It requires an external power supply ranging from 11 V to 32 ...

The NI-9758 is a 4-channel driver with both low and high impedance capabilities, supporting a continuous duty current of 1.5 A. It requires an exte...

The NI-9757 is a versatile model supporting Bosch LSU 4.2 or 4.9 wideband and 4 differential narrowband sensors. Operating within a power supply ra...