Products

The FP-RLY-422, identified by part number 777518-422, boasts a maximum switching capacity of 3 A at 250 VAC or 35 VDC. It consumes 1.5 W of power a...

The FP-RTD-122 is a component with part number 777518-122, equipped with eight inputs compatible with 100 and 1,000 Ω platinum RTDs. It features a ...

The FP-RTD-124 is a model with part number 777318-124, featuring 8 input channels for 2-wire and 4-wire RTDs. It offers a high resolution of 0.016°...

The FP-RTD-PT100 features a part number of 778069-30 and offers a 12-bit resolution. It has an input impedance of 100 Ω and an excitation current o...

The FP-RTD-PT100-3 model features a 12-bit channel resolution and an input range from -50 to 350 °C. It requires a maximum power of 375 mW and offe...

The FP-RTD-PT100-4 is a temperature sensor model designed by National Instruments, with a part number of 778069-31. It has an input temperature ran...

The FP-SG-140 features part number 777518-140 and supports 8 channels. It offers excitation voltage levels of 2.5 V, 5 V, or 10 V and utilizes a 16...

The FP-TB-1 is a versatile part featuring 36 channels, with 4 dedicated channel terminals and 32 defined by an I/O module. It operates safely at a ...

The FP-TB-10 features a maximum operating voltage of 250 Vrms and a power requirement of 150 mW. It offers a measurement resolution of 12 bits (1 p...

The FP-TB-2, part number 777519-02, features 36 spring terminals supporting 16-26 AWG copper conductor wire, including four dedicated terminals and...

The FP-TB-3 is a FieldPoint Isothermal Terminal Base manufactured by National Instruments. It features 18 screw terminals (16 numbered and 2 C chan...

The FP-TC-120, part number 777518-120, features 8 differential input channels and supports temperature ranges from –454 to 3,218 °F, 0 to 2,048 K, ...

The FPM-1017 features a resolution of 1280 × 1024 and a contrast ratio of 450:1. It operates with a power consumption of 48 W and accepts an input ...

The FPT-1015 features a 15-inch screen with a 1024 x 768 resolution. It offers versatile connectivity options including VGA, USB type B, and RS232....

The FW-7344 is a high-performance part with model number FW-7344. It features a 4-axis servo or stepper configuration and a PID loop controller upd...

The Fiber-Optic Cable from National Instruments, known as NI GPIB T7 (Part Numbers: 182805 series), is specifically crafted for the National Instru...

The Fiber-Optic Cable GPIB T8 by National Instruments Specifically crafted for compatibility with the GPIB-140A/2 Extender, the GPIB T8 by Nationa...

The GPIB-1014, manufactured by National Instruments, boasts impressive specifications, including a transfer rate of over 500 kbytes/s and a supply ...

The GPIB-1014D is a high-performance model compliant with the ANSI/IEEE 1014-1987 standard. It offers a transfer speed of up to 500 kbytes/s and op...

The GPIB-1014DP, also known by part number 776093-01, features a standard 24-pin IEEE-488 connector and supports transfer rates up to 80 kbytes/s w...

The GPIB-1014P is a versatile part with a transfer rate of 80 kbytes/sec, which can reach up to 1 Mbyte/sec with an advanced processor and driver s...

The GPIB-110, part number 320052-01, boasts a transfer rate of 144 kbytes/s and an extension distance of up to 2 km. It supports up to 30 devices a...

The GPIB-120A, model number GPIB-120A, supports up to 28 devices within a GPIB system. It operates with an isolation voltage of 60V and its case is...

The GPIB-120B is fully compliant with IEEE 488.1 and IEEE 488.2 standards, ensuring seamless compatibility. It supports up to 28 devices and offers...